Versione: 1.20

ACPI Flash BIOS version 1.20 for Tecra 9000
CHANGE HISTORY
Version 1.20 Â 09-27-2001Initial production BIOS for Tecra 9000

Versione: 1.30

ACPI Flash BIOS version 1.30 for Tecra 9000 Re-packaged on 05-15-2002 to include the Windows-based BIOS installer and BIOS Installation Launcher.
Change History
Version 1.30 ???11-27-2001Corrects a problem where, on systems running WinXP, Speed Step does not turn to low even when the ambient temperature rises to the predetermined level.Corrects a problem where, on systems running WinXP, the ACPI verifier Test of HCT 10.0 fails with errors.Corrects a problem where the PC hangs if refreshing the BIOS utilizing a BIOS package tool afer resuming the PC.Corrects a problem where, on a system running WinXP with two displays (LCD and TV) connected and active, if hide mode is enabled, the window size does not change to 640x480.Corrects a problem where, on a system running WinXP, the switching of the active display by Fn F5 keys fails if the following steps are taken: (1) connect the CRT to the PC, (2) Switch the active display to CRT, (3) Suspend the PC, (4) Warm dock the machine to a port replicator with the CRT, (5) Resume the PC.Corrects a problem on machines running WinXP, W2K or Win98 where the PC occasionally fails to announce 'Resume Fail' if disconnecting the AC adapter and the battery during suspend.Corrects a problem where corruption appears on the display if suspend and resume are repeated using a Toshiba diagnostic.
Version 1.20 ???09-27-2001Initial production BIOS for Tecra 9000

Versione: 1.40

ACPI Flash BIOS version 1.40 for Tecra 9000
Change History
Version 1.40 ???07-02-2002A process to show the cooling module error message was changed.A change was made to correct a wireless LAN failure where the wireless LAN didn't work because the default setting wasn't done correctly.Fixed an error on hang caused by overlap of the IDE transfer and heavy AGP transfer or Bus Master transfer of other devices when the Intel IDE driver (IAA) is installed.Fixed an error of indicating 100% CPU usage rate while running Oracle software during charging.Inhibited performance deterioration caused by the change of the Secondary IDE transfer mode from Ultra DMA to Multi-Word DMA.Fixed an error on screen view halt on Windows logo screen when normal boot is chosen after returning from suspend/resume by power button executed during the display of Windows Startup menu. (menu displayed when booted up with the F8 key pressed).Modified to enable successive Wake Up by Intouch button on models without Bluetooth.Modified to detect EPSON scanner (GT7700: USB) when USB legacy is enabled on WinXP and W2000.Modified to maintain proper operation of USB speaker when system is docked.Modified to avoid power shut down when the system is hot-docked during HDD operation.Modified to reboot W2000 when the sysstem is restarted under W2000 after HDD password registration.Modified to detect correct monitor type besides Default Monitor when the system is booted in LCD display mode under Windows 98.
Version 1.30 ???11-27-2001Corrects a problem where, on systems running WinXP, Speed Step does not turn to low even when the ambient temperature rises to the predetermined level.Corrects a problem where, on systems running WinXP, the ACPI verifier Test of HCT 10.0 fails with errors.Corrects a problem where the PC hangs if refreshing the BIOS utilizing a BIOS package tool afer resuming the PC.Corrects a problem where, on a system running WinXP with two displays (LCD and TV) connected and active, if hide mode is enabled, the window size does not change to 640x480.Corrects a problem where, on a system running WinXP, the switching of the active display by Fn F5 keys fails if the following steps are taken: (1) connect the CRT to the PC, (2) Switch the active display to CRT, (3) Suspend the PC, (4) Warm dock the machine to a port replicator with the CRT, (5) Resume the PC.Corrects a problem on machines running WinXP, W2K or Win98 where the PC occasionally fails to announce 'Resume Fail' if disconnecting the AC adapter and the battery during suspend.Corrects a problem where corruption appears on the display if suspend and resume are repeated using a Toshiba diagnostic.
Version 1.20 ???09-27-2001Initial production BIOS for Tecra 9000

Versione: 1.50

ACPI Flash BIOS version 1.50 for Tecra 9000
Change History
Version 1.50 Â Â Â 02-23-2004Made a change to allow the enabling/disabling of the SD controller.
Version 1.40 Â Â Â 07-02-2002A process to show the cooling module error message was changed. A change was made to correct a wireless LAN failure where the wireless LAN didn't work because the default setting wasn't done correctly. Fixed an error on hang caused by overlap of the IDE transfer and heavy AGP transfer or Bus Master transfer of other devices when the Intel IDE driver (IAA) is installed. Fixed an error of indicating 100% CPU usage rate while running Oracle software during charging. Inhibited performance deterioration caused by the change of the Secondary IDE transfer mode from Ultra DMA to Multi-Word DMA. Fixed an error on screen view halt on Windows logo screen when normal boot is chosen after returning from suspend/resume by power button executed during the display of Windows Startup menu. (menu displayed when booted up with the F8 key pressed). Modified to enable successive Wake Up by Intouch button on models without Bluetooth. Modified to detect EPSON scanner (GT7700: USB) when USB legacy is enabled on WinXP and W2000. Modified to maintain proper operation of USB speaker when system is docked. Modified to avoid power shut down when the system is hot-docked during HDD operation. Modified to reboot W2000 when the sysstem is restarted under W2000 after HDD password registration. Modified to detect correct monitor type besides Default Monitor when the system is booted in LCD display mode under Windows 98.
Version 1.30 Â Â Â 11-27-2001Corrects a problem where, on systems running WinXP, Speed Step does not turn to low even when the ambient temperature rises to the predetermined level. Corrects a problem where, on systems running WinXP, the ACPI verifier Test of HCT 10.0 fails with errors. Corrects a problem where the PC hangs if refreshing the BIOS utilizing a BIOS package tool afer resuming the PC. Corrects a problem where, on a system running WinXP with two displays (LCD and TV) connected and active, if hide mode is enabled, the window size does not change to 640x480. Corrects a problem where, on a system running WinXP, the switching of the active display by Fn F5 keys fails if the following steps are taken: (1) connect the CRT to the PC, (2) Switch the active display to CRT, (3) Suspend the PC, (4) Warm dock the machine to a port replicator with the CRT, (5) Resume the PC. Corrects a problem on machines running WinXP, W2K or Win98 where the PC occasionally fails to announce 'Resume Fail' if disconnecting the AC adapter and the battery during suspend. Corrects a problem where corruption appears on the display if suspend and resume are repeated using a Toshiba diagnostic.
Version 1.20 Â Â Â 09-27-2001Initial production BIOS for Tecra 9000

Versione: 4.00.36(T)

Toshiba Bluetooth Stack

Versione: 3.00.32

Toshiba Bluetooth Monitor

Versione: 9.40#139

Logitech Mouseware

Versione: 3.19.00

Toshiba Mobile Extension 3

Versione: 2.00.21.4000

Toshiba Controls

Versione: SM31100ALL02-RC2

Toshiba Software Modem driver

Versione: 3.02.02

Toshiba Utilities

Versione: 3.00.03

Toshiba ACPI Common Modules

Versione: 1.26

Cisco System Wireless LAN driver

Versione: 1.02.03

Toshiba Bluetooth Stack

Versione: 1.00.04

Toshiba Console

Versione: 1.00.021.4000

Toshiba Controls

Versione: 1.00.031.4000W98

Toshiba Controls

Versione: 5.01

Toshiba Fast Ether LAN adapter driver

Versione: 5.01

Toshiba FastEther LAN Driver

Versione: 5.01

Toshiba FastEther LAN Driver

Versione: 1.00.00.00

Toshiba Display Hotkey Utility

Versione: 3.04.00

Toshiba Mobile Extension 3

Versione: 1.0.3

Toshiba SD Card Driver set

Versione: 1.09.106

Toshiba Wireless LAN Driver

Versione: 1.09.106

Toshiba Wireless LAN Driver

Versione: 1.09.106

Toshiba Wireless LAN Driver

Versione: 1.3

Toshiba WinNT System Driver (IRQ mask for PCMCIA) Toshiba WinNT System Driver (IRQ mask for PCMCIA) version 1.3

Versione: 3.5.2

Toshiba Management Console

Microsoft Hotfix KB950233-Fixes incorrect total memory reported by msinfo32.exe This is a Microsoft Hotfix intended to correct an incorrect data type used to calculate total physical memory in the the msinfo32.exe tool. This program should be run on Windows Vista 64-bit based Toshiba computers only, and will install a Microsoft update based on the knowledge base article at http://support.microsoft.com/kb/950233.
Installation of this Hotfix will correct the following MSINFO32.EXE issue:
The Microsoft System Information tool (msinfo32.exe) does not disply the amount of physical memory installed correctly in the Vista 64-bit Operating System with 4GB or more memory installed.
Hotfix Installation Instructions
Save the file to a convenient location such as the Windows Desktop.
Double-click the downloaded file to begin the update.

Versione: 5.02.02

Toshiba Hibernation Utility

Versione: 4.00.03

Toshiba ACPI Common Modules

Versione: 1.00.01.00.02

Toshiba Display Hotkey Utility

Versione: 5.12.01.3141-RC2

Versione: 6.13.10.2152

Windows XP/SP1/SP2, 2000 Sound Driver for Yamaha AC-XG sound systems This version fixes an incompatibility with Windows XP Service Packs 1 and 2 on Windows XP Home and Windows XP Professional systems.
For more information, please see Support Bulletin 98080074

Versione: 5.04.00

Toshiba Power Saver application

Versione: 1.0.3

Toshiba SD Card Driver set

Toshiba Software Upgrades 3 Portege 2000, 4000, 4005, 7140CT, 7200CTe, 7200CT, 7220CTe
Satellite 1000-S157, 1005-S157, 1005-S158, 1800-S203, 1800-S253

Versione: 1.0.0.1106

Toshiba IDE Optimize program

Versione: 3.21.00.XP

Toshiba Mobile Extension 3

Versione: 4.15.015

Cisco Aironet Client Utility

Versione: 1.00.1.26

Cisco Aironet Wireless LAN Driver

Versione: 1.28

Cisco Aironet Wireless LAN Driver

Versione: 2.05.49

Toshiba Power Management System

Versione: 1.02.10

Toshiba Bluetooth Stack

Versione: 1.00.00-RC3

ATAPI.SYS DMA Enable INF file

Versione: 4.00.00

Toshiba Docking Service

Versione: 4.00.01-RC2

Teac USB FDD Driver

Versione: SM3189ALL09

Toshiba Software Modem driver

Versione: SM3189ALL09

Toshiba Software Modem Driver

Versione: SM3189ALL9

Toshiba Software Modem driver

Versione: 3.17.00.xp

Toshiba Mobile Extension 3

Versione: 3.01.21

Windows NT Midi Driver for S-YXG50 Tecra 9000

Versione: 1.2

Toshiba PC Health Customization

Versione: 5.12.01.2138

Windows 98/2000 Sound Driver for Yamaha AC-XG Sound System

Versione: 4.00.1022

Windows NT Sound Driver for Yamaha YMF753 Sound System Tecra 9000, 9100, TE2100

Versione: 3.00.028

Intel Chipset Software Installation Utility

Versione: 4.08.05-RC2

Toshiba Power Saver application

Versione: 3.00.01

Toshiba Utilities

Versione: 2.15.01

Toshiba Utilities

Versione: 12.80.15

Windows 2000 Display Driver for S3 SuperSavage/IXC display adapters Tecra 9000

Versione: 12.31.17

Windows 98SE Display Driver for S3 SuperSavage/IXC display adapters Tecra 9000

Versione: 12.02.28

Windows NT Display Driver for S3 SuperSavage/IXC display adapters Tecra 9000

Versione: 12.90.32

Windows XP Display Driver for S3 SuperSavage/IXC display adapters Tecra 9000

Versione: 1.1.0.1CK

Toshiba Wireless Hotkey application

Versione: 1.10.107

Toshiba Wireless LAN Driver

Versione: 2.1.63

Toshiba Software Modem Driver

Versione: 1.0 build 60303

Toshiba Notebook PC DMI Update Utility This Utility will eliminate the 'Wrong machine' messages when you try to restore the factory software image from the Config Builder CD or PIRAD CD/DVD. Click for more information about this issue.
Requires either a bootable diskette drive (FDD), or bootable CD-ROM (CD-RW, DVD-ROM/RW). If no FDD is available, requires access to CD authoring (burning) software and hardware.
Build 60303 fixes an issue where Satellite 5205-S705 units were programmed with the incorrect DMI model string.

Toshiba BIOS/CMOS Setup program for Toshiba portable computers Toshiba CMOS Setup program for portable computers.
This DOS program displays and allows you to set the CMOS/BIOS settings of your Toshiba portable computer. This program does not run in a DOS session under Windows. From Windows, you'll need to restart in MS-DOS mode in order to use this utility.
You can also access the BIOS/CMOS setup screen without having to use TSETUP by holding down the [Esc] key when you first power-on the system.

Versione: 1.09.107

Toshiba WiFi Client Manager

Versione: 4.01.05

Yamaha Soft Synthesizer S-YXG50

Versione: 4.10.1999.5.1

Toshiba Infrared Device Driver

Versione: 1.01-RC2

Toshiba PCMCIA.INF file

Versione: 1.21

Toshiba Wireless LAN Card Enabler

Versione: 2.0 (2.0.3)

Toshiba Management Console

Versione: 4.12.00

Toshiba Power Saver application

Versione: 1.20

Versione: 1.30

Versione: 1.40

Versione: 1.50

This guide offers important information about your computer, including solutions to the most common problems, and features and specifications.

For more detailed information, descriptions of other features and more extensive troubleshooting guidelines, see the electronic user’s guide preinstalled on your system.

Versione: 1.0 build 60303